16008 NITROUS EXPRESS MAXIMIZER 5 NITROUS CONTROLLER

Description

NITROUS EXPRESS
MAXIMIZER 5 NITROUS CONTROLLER
The Maximizer 5 features many safety features that help you push your tune-up further while protecting your engine from damage.
The Maximizer 5 progressive nitrous controller operates up to four separate stages of nitrous based on either time, RPM, MPH, throttle percentage or boost pressure. Whether your engine is naturally aspirated or forced induction, gasoline or diesel, the Maximizer 5 is the first choice.
Safety Features:
The Max 5 monitors throttle percentage, engine rpms, nitrous PSI, boost or pan vacuum as well as 3 other user defined sensors to ensure that your engine is in the correct state to accept nitrous. If the Max 5 detects any condition that is outside the safe range, the Max 5 will shut down or pull back nitrous flow to protect your engine from any damage.
Display and Programming options:
The Max 5 is normally setup and tuned via a simple to use windows based laptop program. An optional 4 inch touch screen display can be connected to view and adjust common tuning parameters on the fly without the need for a laptop.
Data Logging:
The Max 5 automatically data logs all inputs (including 3 user defined inputs) so you can review important data for multiple previous runs. The Max 5 includes enough internal memory to store over 100 quarter mile runs before you need to save them to a laptop.
Hardware Features:
The Max 5 includes internal drivers for stage one and stage two that handle 70 amps each or 140 amps in single stage mode. Stages 3 and 4 require external drivers which are available separately.
Progression Options:
The Max 5 has multiple progression options to cover a variety of racing types. These progression options are described below:
Time based progression:
This option is a popular choice for drag racing applications where you always start from a dead stop. This option is very easy to fine tune so that you leave soft enough to eliminate wheel spin, and increases power as you go down track, the controller smoothly adds more nitrous as traction increases.
RPM based progression:
This option works great for vehicles that have enough traction to handle full nitrous power at the top of first gear. This mode allows you to add a little nitrous in the lower engine RPMs and ramp into full nitrous as the engine rpm increases. This is a great option for vehicles with a tight torque converter. Since nitrous flow is limited to a small amount at low RPMS, you can safely activate the nitrous at lower RPMs which will help to pull the car out of the hole.
MPH (Miles Per Hour) progression:
This option is great for racers who sometimes begin racing from a dead stop and other times begin racing from a rolling start. The nitrous controller will automatically limit nitrous to a smaller boost at low speeds where traction is limited while providing a larger boost at higher speeds where traction is more plentiful. Bracket racers can use this feature to set a MPH nitrous cutoff for the ultimate in consistent ETs.
Throttle percentage progression:
This option allows you to “pedal” the car in the event of wheel spin. Nitrous flow smoothly increases and decreases as you “work” the throttle, allowing you to regain traction and continue racing. This is very beneficial to road race and drifting vehicles. The throttle percentage feature is also beneficial for street cars because it allows you to introduce a small amount of nitrous at mid throttle while smoothly transitioning to full nitrous power as you press the throttle to the floor. The feeling is like driving a car with twice the cubic inches.
Boost based progression:
This is a useful option for turbocharged diesels and gasoline applications. Boost progression allows nitrous to come on strong to eliminate that dreaded turbo lag, then ramps out the nitrous smoothly to let the mighty turbo do its thing. The end result is monster power with zero lag, even with a HUGE turbo. On diesel applications it will not allow full nitrous delivery until the engine starts to build adequate boost, preventing a nitrous engine stall.
EGT (Exhaust Gas Temperature) progression:
Injecting nitrous into a diesel application lowers EGTs. This is a useful option for diesel applications that don’t want to use nitrous all the time but still want the EGT lowering properties that nitrous provides. EGT based progression allows you to create a safety ramp which will only add nitrous if EGTs rise to unsafe limits. Compatible with all EGT modules that have a 0 to 5 volt output signal.
AFR (Air Fuel Ratio) compensation and protection:
The Maximizer 5 monitors the engines Air Fuel Ratio (from aftermarket wide band O2 module), and automatically adjusts the fuel and nitrous solenoid output to achieve the desired Air Fuel Ratio (target AFR is user adjustable). As bottle pressure drops toward the end of a run, the Maximizer 5 will automatically adjust the solenoid output so you maintain a consistent and safe AFR. Air Fuel Ratio safety cut off limit (too rich and too lean) are user adjustable so the controller will completely shut off nitrous flow if the Air Fuel Ratio goes outside the user defined limits.
This product ships directly from the manufacturer.
WHO WE ARE:
We are CBM Motorsports based out of Colton, CA, USA.. We specialize in racing and high performance LS engines and parts for off road vehicles, hot rods, muscle cars, drag cars, rock crawlers and watercraft. We manufacture and stock hundreds of specialty parts and accessories for the Chevrolet LS and Ecotec series engine. If you are looking to gain more horsepower out of your current set up or want to build an engine from the ground up look no further.
Our team includes GM world-class certified technicians,
ASE certified technicians and MECP certified professionals.
We offer chassis dyno tuning services, LS engine repair, LS engine swaps, and custom fabrication. We stand behind our products with an industry leading warranty and have thousands of satisfied customers. If you are local, please come visit our showroom and see what the leading LS engine builders in the world has to offer. If you have any questions, comments, or concerns about a product we sell or services we provide, please send us a message.
Thank you.
Payment options:
We prefer Paypal but also accept payment in person. Please understand we will only ship item once payment has been received. The payment is due within 24 hours of the auction closing. If you cannot pay for an item please do not bid. Any bidder who fails to pay for an item within a reasonable amount of time will be reported to eBay.
TERMS AND CONDITIONS:
We leave feedback automatically once the item has been paid for. We consider our feedback
VERY IMPORTANT.
Please do not leave negative feedback without contacting us first. Let us know if there was a mistake made during your order and we will do our best to resolve the issue. If you have any questions, comments, or concerns about the auction please
send us a message. We make sure every customer is 100% satisfied no matter the size of the order. Please understand we are a business and appreciate every one of our customers.
ALL
California customers will be charged 7.75% sales tax.
New items carry manufacturing defect warranty only. (Please contact us on an item for its specific warranty) If you are not thoroughly satisfied within 30 days of your purchase, we will make it right with an exchange or a refund.
Shipping Details:
Most orders ship the
SAME DAY!!!
Custom-made parts may take longer.
If tracking information is available it will be sent to your Paypal address when the order ships.
Shipping quote is for 48 main states only. Residents of Hawaii, Alaska or Mexico please email your shipping information prior to bidding. If there is a delay in your order for any reason you will be notified via email. Please understand Saturday, Sunday & Holidays
DO NOT
count a
s normal operating business days. Our normal operating hours are 9:00AM-5:00PM Monday through Friday PST. If your auction ends on a weekend, it will most likely ship on Monday.
If you would like to purchase multiple items we would be happy to
combine
shipping.
If you would like your package
INSURED
please let us know and we would be happy to add it to the quote.
We ship worldwide but only to a confirmed Paypal address.
NO EXCEPTIONS.
Please let us know if you would like a customized shipping quote for your location. Be sure your address is confirmed prior to bidding. UPS will not deliver to P.O. Boxes.
General return guidelines:
If you are not satisfied with your part or accessory for any reason, you may return it within 30 days of receipt of your order. Please be aware that shipping charges are non refundable.
You may return products that:
Do not have missing parts.
Are in their original packaging.
Are not damaged, previously installed, or used.
Have original manufacturer information enclosed.
Were not custom built, painted, or modified for your application.
If your return meets these guidelines, we will issue a refund. 15% Restocking fee may apply.
CBM Motorsports Media Design 2018